Epiphan Networked VGA Grid - Manual (Page 243)

Networked VGA Grid User Guide 7-3 Save and Restore Device Configuration
7-3
Save and Restore Device Configuration
After completing configuration of your Networked VGA Grid, it is good practice to save the system
configuration so you may restore it at a later date (i.e. after a change that wasn’t wanted, or after a factory
reset) or so you may load it onto another system to provision it with the same configuration.
This section covers the following topics:
l
Save device configuration
l
Load a saved device configuration
Save device configuration
Networked VGA Grid's web interface allows you to save the current system configuration to your admin
computer's hard drive. It’s good practice to do this before making any major changes to a working
configuration and before doing a firmware update.
The resulting backup file includes all non-default configuration settings for the system, except the
user passwords which are reset when a configuration is restored.
To save the current system configuration:
1. Connect to the admin interface using your preferred connection mechanism. See Connect to the Admin
Interface .
2. Login as admin.
3. Select the Maintenance link in the Configuration menu; the maintenance page opens.
4. Click the Backup button next to Backup Current Configuration; the system performs a backup and
depending on your browser the file is either automatically downloaded or you are asked to save the file.
231