Epiphan Networked VGA Grid - Manual (Page 199)

Networked VGA Grid User Guide 5-4 File and recording transfer
5-4
File and recording transfer
Your Networked VGA Grid can be configured to automatically upload recordings from local storage to a
network storage location or an attached USB drive.
This section discusses the following generic automatic upload topics:
l
Automatic file upload (AFU) overview
l
Configure the files included in AFU (part 1 of 3)
l
Enable and configure the frequency of AFU (part 2 of 3)
And the following specific configurations based on the location of upload:
l
Configure AFU to an FTP server (part 2 of 3)
l
Configure AFU using RSync (part 2 of 3)
l
Configure AFU using CIFS (part 2 of 3)
l
Configure AFU to a secure FTP server (part 2 of 3)
l
Configure AFU using SCP (part 2 of 3)
l
Upload to an external USB drive
l
Automatically (part 2 of 2)
l
As a one-time copy
l
Manually
Lastly, this section describes how to view file upload logs:
l
View the file upload log
Automatic file upload (AFU) overview
Networked VGA Grid can automatically upload files to an accessible off-system storage location.
The following types of off-system storage are supported: FTP, CIFS, RSync, SFTP, SCP and USB Drive.
Only one type of AFU can be used at once.
Files are uploaded once (i.e. are automatically not re-uploaded during future sessions) and a log is kept
showing the file transfers (see below for details on viewing the log). The first transfer occurs after the
configured amount of time expires, or after the current file completes recording. If connection is lost during the
transfer, the transfer is automatically restarted when the connection is reestablished.
187