Epiphan Networked VGA Grid - Manual (Page 45)

Networked VGA Grid User Guide 1-3 Configure Network Settings
1-3
Configure Network Settings
By default the Networked VGA Grid uses DHCP to obtain an IP Address via an Ethernet-based network. If you
want to change the network settings, or if you’re having network-related issues, this section covers the
following related topics:
l
Verify IP Address and MAC address
l
Configure a Static IP Address
l
Configure DHCP
l
Tether to a Mobile Network
l
Perform Network Diagnostics
For VGA Grid HD Encoder network settings, see Configure Encoder Network Settings .
Verify IP Address and MAC address
The web interface shows you the system’s MAC address and current IP Address via the Network configuration
page.
To view settings on network configuration page:
1. Connect to the admin interface using your preferred connection mechanism. See Connect to the Admin
Interface .
2. Login as admin.
3. Select the Network link in the Configuration menu; the network configuration page opens.
4. Note the MAC address and Current IP address listed at the top of the page.
33