Afu to a usb drive (part 2 of 3) – Epiphan Networked VGA Grid User Manual
Page 212
Networked VGA Grid User Guide
5-4 File and recording transfer
l
View available USB storage space
l
Only one copy or move to USB operation is permitted at a time, even though the UI may appear to
let you start a second one. Please wait until the first is complete before starting a new operation.
AFU to a USB drive (part 2 of 3)
This procedure assumes you have completed the steps in
Enable and configure the frequency of AFU (part 2 of
and wish to continue with configuration of upload to a USB drive.
To configure automatic upload to a USB drive:
1. Insert the properly formatted USB drive into one of the system’s USB ports.
2. Select External USB Drive from the protocol drop down list in the Automatic File Upload configuration
page; the lower half of the page reflects the selection.
3. If your Automatic File Upload setting conflicts with your new USB drive setting, a message is displayed.
4. Click the fix link.
200