Create an s-video channel – Epiphan Networked VGA Grid User Manual
Page 107
Networked VGA Grid User Guide
3-1 Create and configure channels
Create an S-Video channel
Follow the steps below to create an S-Video channel. Procedures to select a codec for compressions and
decompression, add a time stamp to the stream, and select a layout when two channels are configured are
described in separate procedures.
Before proceeding, ensure you have added the VGA Grid HD Encoder as a channel. See Add an
encoder as a source for a multi-source channel.
To add an S-video channel complete these steps in the VGA Grid's web interface:
1. Connect to the admin interface using your preferred connection mechanism. See
.
2. Login as admin.
3. Ensure an S-Video input source is connected to the VGA Grid HD Encoder.
4. From the web interface, click Encoding for the encoder's channel; the Encoding page opens.
5. If you're not sure which codec to pick, keep the default, H.264. For help selecting a codec, refer to
6. Keep the default video encoding preset and profile, or for help selecting these values, refer to
7. Scroll to the Video Channel section.
8. Select the Enable video channel check box, if not already selected.
95