Epiphan Networked VGA Grid - Manual (Page 203)

Networked VGA Grid User Guide 5-4 File and recording transfer
Name Description
Every 6 hours The system uploads completed recordings every six hours.
Every 12 hours The system uploads completed recordings every 12 hours.
Every 24 hours The system uploads completed recordings every 24 hours.
6. Indicate the remote path, if desired. If no path is specified, the files are copied to the root folder of the
destination file system.
If the remote path does not exist on the remote server or USB drive, the file transfer fails.
7. If desired, check Remove after upload to have the files deleted from local storage when upload
completes.
8. If desired, check Mark file as downloaded to have the color of the file link in the recording list change
to show the files are downloaded. This only applies if the files are not deleted after upload is complete.
9. Select the protocol or destination for upload. The following table describes the options.
Table 27 Automatic File Upload Interval Options
Name Description
FTP Client The system uploads to an FTP server.
RSync Client The system uploads to a network location using RSync to copy the file.
CIFS Client The system uploads to a network location using CIFS (also known as SMB or
samba) such as a shared folder on a Windows machine.
SFTP Client The system uploads to a secure FTP server. Authentication is done either by
password or uploaded SSH key.
SCP Client The system performs secure copy (SCP) to a remote server. Authentication is
done either by password or uploaded SSH key.
External USB Drive The system uploads to a USB drive connected directly to the system.
10. Follow one of the procedures below to configure your selected protocol or transfer type.
l
Configure AFU to an FTP server (part 2 of 3)
l
Configure AFU using RSync (part 2 of 3)
l
Configure AFU using CIFS (part 2 of 3)
l
Configure AFU to a secure FTP server (part 2 of 3)
191