Epiphan Networked VGA Grid - Manual (Page 283)

Networked VGA Grid User Guide 7-11 Configuration Keys for Third Party APIs
Key Values Description
server_name string Specifies the UPnP server name.
To use the system name, set to an empty string ("").
SAP Configuration Keys
The following settings are supported for SAP sharing.
Table 45 Supported SAP Configuration Keys
Key Values Description
sap on
empty string ("")
Enables sharing of recorded files via SAP.
To enable sharing files over SAP, set to on.
To disable sharing files over SAP, set to an empty string ("").
sap_channel_no integer Specifies the SAP channel number.
sap_group string Specifies the SAP group name.
sap_ip string Specify the SAP annoucement IP.
Frame Grabber Configuration Keys
The following configuration settings are supported by the system. See Configure a video source for more
information on each variable.
Table 46 Supported Frame Grabber Configuration Keys
Key Values Description
gain 0...255 Specifies ADC gain adjustments.
0 is brightest, 255 is darkest.
hshift -999...999 Specifies horizontal shift.
For shifts to the left, use positive values.
For shifts to the right, use negative values.
offset 0...63 Specifies ADC offset.
0 is brightest, 63 is darkest.
phase 0...31 Specifies phase adjustments for VGA signals. Generally not used
unless value is provided by Epiphan support.
271