Epiphan Networked VGA Grid User Manual
Page 175
Networked VGA Grid User Guide
4-1 Stream your video
When a channel number value is not specified, viewers cannot select a channel from the set-
top box or Smart TV .
13. Enter a name for a group of streams in the text box next to Group name. Since media players simply
present a list of available streams, you can organize your streams into multiple folders or in cases where
folders are not displayed, use dot separator hierarchy to help your viewers filter out unwanted streams
by category.
14. Click Apply. To view the stream, open the URL in a media player, for example:
udp://@ip:port
For example: udp://@226.10.24.32:7000
To view the stream when SAP announce has been set and the stream is advertised from a media player,
set-top-box or Smart TV, refer to
Viewing with SAP Announce.
Multicast streaming for MPEG-TS streams using RTP/UDP push
To configure the MPEG-TS stream, ensure the following codecs are configured:
l
Video – H.264
l
Audio – MP3 or AAC, if audio is configured.
1. Connect to the admin interface using your preferred connection mechanism. See
.
2. Login as admin.
3. From the web interface, click a Channel; the menu expands.
4. Click Streaming; the channel's Streaming page opens.
5. Click the Publish drop-down menu.
6. Choose using MPEG-TS RTP/UDP push.
7. Enter the destination multicast IP address where the broadcast can be viewed.
A IPv4 multicast address range is an address between 224.0.0.0 to 239.255.255.255. Contact
your System Administrator for the specific address to use.
163