Epiphan Networked VGA Grid - Manual (Page 209)

Networked VGA Grid User Guide 5-4 File and recording transfer
5. Enter the SFTP account password in the Password field; the characters are masked with dots.
(Alternatively you can choose to use a private key instead of a password for authentication.)
6. Select Use temp file to name files with a temporary filename extension (.part) on the server until upload
is complete.
For secure file transfer you can upload an SSH identity for your Networked VGA Grid. This
key must be trusted by the destination server. Details for generating the key and setting up
this trust are beyond the scope of this document.
7. If desired, scroll down to the section labelled SSH identity for SCP and SFTP clients.
1. If no identity is uploaded, or to upload a new identity (overwrites the old identity):
a. Click Choose File; a file selection dialog opens.
b. Select the private key file from your hard drive and click Open.
The system accepts RSA keys for SSH-1; DSA, ECDSA, EC25519 and RSA for SSH-2.
Keys must be in OpenSSH format.
c. Click Upload to upload the file.
2. Use the Test your key field to test your uploaded key against the secure server, if desired.
8. Click Apply; if there are any problems the system notifies you with a message: One or more parameter
values are not valid and those were not applied!
The following table describes the options applicable to configuring upload to a SFTP server.
Table 31 SFTP Automatic Upload Configuration Options
Name Description / Options
Server address The IP address (or fully qualified domain name) of the SFTP server.
Server port The port used by the target SFTP server. Standard port is 22.
Login Username for the SFTP server.
Password Password for the SFTP user.
Use temp file Causes files to be named with .part extension on the server during active upload. When the
upload completes, the file is renamed to the appropriate extension (.mov, .mp4 or .avi).
197