Epiphan Networked VGA Grid - Manual (Page 149)

Networked VGA Grid User Guide 4-1 Stream your video
Disabling streams for viewers disables all viewer formats including HTTP, RTSP, HLS and UPnP.
To disable (or enable) streams for viewers:
1. Connect to the admin interface using your preferred connection mechanism. See Connect to the Admin
Interface .
2. Login as admin.
3. From the web interface, click Streaming for the desired channel; the streaming page opens.
3. Uncheck Enabled to disable streaming to viewers (or check to enable).
4. Click Apply at the bottom of the page.
Restrict access to streams for viewers
Networked VGA Grid can restric access to all viewer streams using global viewer passwords and IP allow/deny
lists. See Setting and Changing User Passwords and Restrict Viewers by IP Address
If LDAP is configured for viewer authentication, the viewer must pass global autentication using
LADAP credentials (or the viewer global password, if there is one) and must meet the local channel
settings (come from an allowed IP address). See Configure LDAP for more information on LDAP
configuration.
To restrict viewers for a channel:
137