Epiphan Networked VGA Grid - Manual (Page 193)

Networked VGA Grid User Guide 5-3 File Maintenance
5-3
File Maintenance
The Networked VGA Grid has a finite amount of storage. Though this storage space holds a lot of recordings, it
will eventually run out of space if recordings are added but never removed. When this happens, the system
deletes the oldest recorded files to make room for new recordings.
You can use a variety of methods to automatically transfer files from the system to local network storage.
Alternatively you can manually select individual recordings to transfer or delete. This section discusses the
following manual file management topics.
l
View the List of Stored Files
l
Rename Stored Files
l
Download Files Manually
l
Delete Files Manually
l
Pick Specific Tracks from a Multi-track Recorder File
For information on automatic file transfers, see File and recording transfer .
View the List of Stored Files
Recordings for Networked VGA Grid are stored for each channel and each recorder separately. To view all the
recordings stored, follow the procedures below for all channels and all recorders you have configured.
To view the recordings for a channels or recorders:
1. Connect to the admin interface using your preferred connection mechanism. See Connect to the Admin
Interface .
2. Login as admin or operator.
3. To view files recorded for a channel:
a. Select a channel from the Channels section; the channel menu expands.
b. Select the Recording link for your channel; the Recording page appears.
4. To view files recoded for a recorder:
a. Select the recorder from the Recorders section; the recorder page appears.
5. If there are no files:
a. A message indicates there are no recorded files (for this channel).
181