Epiphan Networked VGA Grid User Manual
Page 101
Networked VGA Grid User Guide
3-1 Create and configure channels
If you have not already done so, it is suggested you set static IP addresses for your encoders. See
Set a static IP address for the encoder
To add an encoder as a channel complete these steps in the VGA Grid's web interface:
1. Connect to the admin interface using your preferred connection mechanism. See
.
2. Login as admin.
3. Ensure a DVI or S-Video input source is connected to the VGA Grid HD Encoder.
4. From the web interface, scroll to the Channels menu option. A list of existing channels, if any is
displayed.
5. Click on Add channel located at the bottom of the list; the Sources page opens
6. Click on the Use video source drop-down menu; a list of available sources appears.
7. Choose External encoder from the list; the external encoder configuration options appear below the
drop-down menu.
89