Epiphan Networked VGA Grid - Manual (Page 221)

Networked VGA Grid User Guide 5-5 Use the Local FTP Server
videom (i.e. videom1 for the first recorder). Channel and recorder numbers are discoverable
via the URL of the channel and recorder configuration page. See Create and configure channels and Recorders .
To get started you will need:
l
The IP address of your system (found in the Network configuration menu)
l
An FTP tool
l
The username and password for your FTP user (See Configure the Local FTP Server )
In the example below, the IP address of the Networked VGA Grid is 192.168.1.210, the username is admin, there
is no password, and the Windows command line ftp utility is used.
To connect to the FTP server:
1. Open a command window on Windows (alternatively open a terminal window on Linux/Mac, or open
your FTP utility of choice).
2. Establish an ftp connection using the command: ftp 192.168.1.210
3. Provide the username: admin (provide the username of your FTP user)
4. Provide the password: (provide the correct password for your FTP user); the connection is opened.
5. Use the dir command to see the file structure.
6. Use dir or your tool’s GUI to look in each folder for recordings.
7. Use get or your tool’s transfer mechanism to transfer files to your computer.
209