Epiphan Networked VGA Grid User Manual
Page 201
Networked VGA Grid User Guide
5-4 File and recording transfer
3. For a channel recording:
a. Click the desired channel; the channel menu expands.
b. Select the Recording link for the channel; the Recording page opens.
4. For a recorder:
a. Click the desired recorder link from the Recorders section; the recorder configuration page
opens.
5. Select the change link under Recorder Setup; the recorder setup section expands. (The setup page
looks slightly different for Recorders, but the options are the same.)
6. Check the Automatic file upload check box.
7. Click Apply; the Recording page is refreshed and the new settings are reflected.
Enable and configure the frequency of AFU (part 2 of 3)
After configuring the channels and recorders to include in your AFU schedule, you must enable AFU and
configure the frequency of transfers.
Files saved before you complete automatic file upload configuration are not part of the automatic
upload. Manual file transfer is required for these files. See
To enable and configure frequency automatic uploads:
1. Connect to the admin interface using your preferred connection mechanism. See
.
2. Login as admin.
189