Epiphan Networked VGA Grid - Manual (Page 67)

Networked VGA Grid User Guide 1-4 Configure Encoder Network Settings
Table 13 Network Information Fields
Label Description/Options
MAC Address A media access control address (MAC address) is a unique identifier for the
network interface. The value is read-only and cannot be changed. You may need
to share this value with your system administrator.
Current IP Address Reflects the current internet protocol address (IP address) of the system. This
value is either obtained from the DHCP server (if using DHCP) or is the configured
static IP address. The VGA Grid HD Encoder supports IPv4 addresses. It does not
support IPv6 addresses.
Set a static IP address for the encoder
If you have not already set a static IP address for the VGA Grid HD Encoder:
1. Find the VGA Grid HD Encoder's serial number. It is printed on a sticker on the bottom of the unit.
2. Follow the instructions in Connect to the Admin Interface to connect to the VGA Grid HD Encoder (use
the serial number from step 1 above, instead of the serial number of the VGA Grid).
3. Login as admin.
4. Navigate to the Network link under the Configuration heading; the network configuration page opens.
5. Select the radio button use static address, if not already selected.
6. Enter the desired IP Address and Network Mask.
Only IPv4 addresses are supported.
55