Epiphan Networked VGA Grid - Manual (Page 58)

Networked VGA Grid User Guide 1-3 Configuration presets
If the configuration preset includes the network or system configuration groups, a reboot
is necessary.
7. Click OK to apply the configuration preset; the configuration preset is applied.
8. The system reboots if needed.
Apply the Factory default configuration preset
Your Networked VGA Grid comes with a special factory default configuation preset. This configuration preset
cannot be erased and is always presented at the top of the configuration presets list. It contains all possible
configuration settings groups.
Using the Factory default configuration setting is similar to using the Factory reset method (see Perform
Factory Reset with a few important differences.
In short, the Factory default configuration preset is less destructive than Factory reset. This table describes
the exact differences.
Table 12 Factory default configuration preset vs Factory reset
Factory default
configuration preset
Factory reset function
Deletes all created channels ü ü
Deletes all recorded files in channels
ü
Deletes all created recorders ü ü
Deletes all recorded files in recorders ü
Resets network configuration ü ü
Resets touch screen configuration ü ü
Resets user passwords ü ü
Deletes all created configuration presets ü
46