Epiphan Networked VGA Grid User Manual
Page 293
Networked VGA Grid User Guide
7-12 Troubleshooting
Problem
Action(s) to Resolve
Frames per second are lower than
expected.
The following tips can help improve frames per second (fps):
1. Increase the Limit frame rate value and/or decrease the
Bitrate value in the Encoding menu. See
.
2. Reduce the number of actions happening simultaneously
on the system (i.e. if streaming, recording, and copying
files, consider waiting to copy files until after streaming
and recording are complete).
3. Enter a low negative value (i.e. -5) in the Frame Grabber's
Vertical Shift field.
4. Reduce the number of channels encoding data.
Stream won't play in my media player or
browser.
Verify that the Stream Type matches with the media player used
and that you have the correct url or SDP file for the player. See
If you still cannot see the stream, try disabling your local
computer firewall.
If the issue is still not resolved, contact Epiphan Support at
The stream interrupts or the image
breaks up.
The following tips can help diagnose image problems:
1. Ensure the source resolution is used as the output or
recorded resolution. Up-scaling and down-scaling can
2. Increase the Bitrate value and/or decrease the Limit
frame rate value in the Encoding menu. See
.
3. Check network settings including filters, routers and
application settings. Packet loss can result in stream
failure.
Recording issues.
If recording will not start, check the Disk Status Information to
see if the system is out of disk space. See
Firmware upgrade fails.
Reboot the system and try again. If the problem persists,
281