Epiphan Networked VGA Grid User Manual
Page 19
Networked VGA Grid User Guide
What's in the Box?
Table 2
VGA Grid HD Encoder Front Panel Descriptions
Label
Name
Description
Reset button
Resets the Networked VGA Grid back to its factory configuration
defaults.
To ensure the device is not accidentally reset, a special sequence is
Status LEDs
Three LEDs on the front panel indicate the following Networked
VGA Grid status:
Solid blue LED indicates device is starting up.
Solid green LED indicates the device is ready to capture images.
Flashing blue LED indicates:
l
a video signal test is in progress;
l
system tuning, or
l
Networked VGA Grid is recording received images.
Note: If the periodic disk check function occurs during start up, it may
take up to 20 minutes to power up the device. During this time the
blue LED is solid and the green LED flashes. See
for more information.
S-video input
Connect to an s-video source or a composite video source using the
adapter (included).
7