beautypg.com

Delta Electronics AC Servo Drive ASDA-B User Manual

Page 224

background image

Chapter 7 Servo Parameters|ASDA-B Series

Revision February 2008, Doc. Name: 2006PDD23000009

7-71

2: LED testing.

3: Dynamical memory testing (RAM). The testing time is approx. 18 seconds.

4: Data memory testing (EEPROM). The testing time is approx. 140 seconds.

This parameter is used to test the hardware of the keypad. Since the life of the data memory is
limited and using this parameter will consumed the life of data memory, it is not recommended to
use this parameter and change the factory default setting if not necessary.

P8 - 10

KBLT

LCD Backlight Display

Communication Addr.: 080AH

Default: 0

Related Section: N/A

Applicable Control Mode: P/S/T

Unit: N/A

Range: 0 ~ 1

Settings:

0: OFF. LCD backlight is going off.

1: ON. LCD backlight is going on.

P8 - 11

KCLR Memory Block Clear

Communication Addr.: 080BH

Default: 0

Related Section: N/A

Applicable Control Mode: P/S/T

Unit: N/A

Range: 0 ~ 124

Settings:

ASD-PU-01A

ASD-PU-01B