Comtech EF Data RCS20 - Manual (Page 87)

RCS20 M:N Redundancy Switch Revision 15
User Interfaces MN-RCS20 and CD-RCS20
4–53
Key Label Function
S2 
Press to move the blinking cursor to the left. Used to select the modem for the
service selection.
S3
TOG
MODE
Used to toggle between N and S.
S4 RETURN Press to cycle back to the MODEM SERVICE MODE Screen.
Numeric Keypad --- Press to accept change.
4.3.2.29 IFS20-L DEMOD BKUP Assignment Summary
Go to the CONFIG SWITCH Menu. Toggle to the IFS20L DEMOD BKUP ASSIGNMENT SUMMARY
Screen.
Press the Button S1 (SET BU1) on the Front Panel. The IFS20L DEMOD BKUP ASSIGNMENT
PROGRAM Screen will appear.
The blinking cursor is on Modem 1. Press S3 (TOG MODE) until Modem 1 is set to “A”.
Use the S1 and S2 keys to navigate and set each of the Prime Modems. Modems 1 - 4 should be set to
“A” and Modems 5 - 8 should be set to “B”.
When each of the Prime Modems is set to the appropriate letter, press the ENT Key.