Comtech EF Data RCS20 - Manual (Page 82)

RCS20 M:N Redundancy Switch Revision 15
User Interfaces MN-RCS20 and CD-RCS20
4–48
4.3.2.22 CnC SWITCHING
This screen is the actual location where the user can configure the CnC Switching Mode.
Key Label Function
S1 TOG MODE Press to toggle between NO and YES.
S2 --- N/A
S3 --- N/A
S4 RETURN Press to return to the BANK CONTROL CONFIGURATION Screen
Numeric Keypad --- Press to accept change.
4.3.2.23 SOFTWARE/FIRMWARE VERSIONS
This screen displays the current software version number and firmware part number for the RCS20. No
switch parameters are programmed from this screen.
Key Label Function
S1 --- N/A
S2 --- N/A
S3 --- N/A
S4 NEXT Press to cycle to the next screen.
Numeric Keypad --- N/A
SOFTWARE/FIRMWARE VERSIONS
FIRMWARE PART NUMBER : F0XXXXXX
SOFTWARE VERSION NUMBER : X.X
NEXT
CARRIER-IN-CARRIER MODEMS
CNC SWITCHING: YES
TOG MODE RETURN