Comtech EF Data RCS20 - Manual (Page 73)

RCS20 M:N Redundancy Switch Revision 15
User Interfaces MN-RCS20 and CD-RCS20
4–39
4.3.2.10 MODEM PORT BAUD RATE CONFIGURATION
This subscreen allows the user to modify the Modem Port Baud Rate.
4.3.2.10.1 Programming steps:
1. Select either <9600>, <19200>, <38400>, or <57600> to select the baud rate.
2. Press or to abort programming (no switch parameters changed).
3. Press to load the information on the screen into the switch parameter table. Switching will
occur immediately after pressing .
Key Label Function
S1 9600 Press to select 9600 bps.
S2 19200 Press to select 19200 bps.
S3 38400 Press to select 48400 bps.
S4 57600 Press to select 57600 bps.
Numeric Keypad --- Press to abort programming (no switch parameters changed).
MODEM PORT BAUD RATE CONFIGURATION
RCU20 MODEM PORT BAUD RATE : 1200
9600 19200 38400 57600