Comtech EF Data RCS20 - Manual (Page 65)

RCS20 M:N Redundancy Switch Revision 15
User Interfaces MN-RCS20 and CD-RCS20
4–31
Key Label Function
Numeric Keypad ---
Press to advance to next screen.
Press to return to previous screen.
4.3.2.2 TERMINAL PORT CONFIGURATION
This screen displays both the Terminal Baud Rate and the Terminal Emulation Type, and allows the user
to cycle to Subscreens to change the configurations. The baud rate may be any of the following:
• 19200
• 9600
• 2400
The emulation type may be any of the following:
• ADDS VP
• VT 100
• WYSE 50
4.3.2.2.1 Programming steps:
1. Press to cycle to the TERMINAL PORT BAUD RATE Subscreen to change the
configuration. Press to cycle to the TERMINAL PORT EMULATION Subscreen to
change the configuration.
IMPORTANT
After changing the Terminal Port Baud Rate, power must be cycled before the baud
rate change takes effect.
Key Label Function
S1 BAUD Press to cycle to the TERMINAL PORT BAUD RATE Subscreen.
S2 EMUL Press to cycle to the TERMINAL PORT EMULATION Subscreen.
TERMINAL PORT CONFIGURATION
TERMINAL BAUD RATE : 19200
TERMINAL EMULATION : VT 100
BAUD EMUL NEXT