Comtech EF Data RCS20 - Manual (Page 162)

RCS20 M:N Redundancy Switch Revision 15
Remote Operations MN-RCS20 and CD-RCS20
A–20
<1> Backup 1 (Channel 0)
Backup Mode 0 = Manual, 1 = Automatic non-Revertive, 2 = Automatic Revertive
<1> Backup 1 (Channel 0)
Force Manual
Modulator Backup Channel number for manual backup (1 to 9) (ignored if in automatic
mode)
<1> Backup 1 (Channel 0)
Force Manual
Demodulator Backup Channel number for manual backup (1 to 9) (ignored if in automatic
mode)
<1> Backup 2 (Channel 9)
Configuration 0 = Backup modem, 1 = Preempt able prime modem, 2 = Prime
Modem
<1> Backup 2 (Channel 9)
Backup Mode 0 = Manual, 1 = Automatic non-Revertive, 2 = Automatic Revertive
<1> Backup 2 (Channel 9)
Force Manual
Modulator Backup Channel number for manual backup (1 to 8) (ignored if in automatic
mode or if channel 9 is configured as prime)
<1> Backup 2 (Channel 9)
Force Manual
Demodulator Backup Channel number for manual backup (1 to 8) (ignored if in automatic
mode or if channel 9 is configured as prime)
<4> Reserved (Reserved for RCS10, set to zero)
<4> Reserved (Reserved for RCS10, set to zero)
<1> Reserved (Reserved for RCS10, set to zero)
<1> Reserved (Reserved for RCS10, set to zero)
<1> Reserved (Reserved for RCS10, set to zero)
<1> Learn Modem 0 = Modem 0, 1 = Modem 1, 2 = Modem 2, 3 = Modem 3, 4 = Modem
4, 5 = Modem 5, 6 = Modem 6, 7 = Modem 7, 8 = Modem 8, 9 =
Modem 9, 10 = All Modems
<1> Test Modem
0 = Modem 1, 1 = Modem 2, 2 = Modem 3, 3 = Modem 4, 4 = Modem
5, 5 = Modem 6, 6 = Modem 7, 7 = Modem 8, 8 = Modem 9, 9 = All
Modems, , 10 = None
This byte should be forced to 10 if no tests are desired, failure to do so may result in
momentary loss of link on selected modem(s).
<1> Additional Bytes per
Channel 6 bytes as of release 4.0