Comtech EF Data RCS20 - Manual (Page 69)

RCS20 M:N Redundancy Switch Revision 15
User Interfaces MN-RCS20 and CD-RCS20
4–35
4.3.2.6 REMOTE PORT BAUD RATE CONFIGURATION
This subscreen allows the user to modify the Remote Port Baud Rate.
4.3.2.6.1 Programming steps:
1. Select either <115200>, <57600>, <38400>, <19200>, <9600>, <4800>, <2400>, or <1200> for
the baud rate.
2. Press or to abort programming (no switch parameters changed).
Key Label Function
S1 1200 Press to select 1200 bps.
S2 2400 Press to select 24800 bps.
S3 4800 Press to select 4800 bps.
S4 Next Press to show next available baud rates.
Numeric Keypad --- Press to abort programming (no switch parameters changed).
S1 9600 Press to select 9600 bps.
S2 19200 Press to select 19200 bps.
S3 38400 Press to select 38400 bps.
S4 Next Press to show next available baud rates.
S1 57600 Press to select 57600 bps.
S2 115200 Press to select 115200 bps.
S3 --- N/A
S4 Return Press to abort.
REMOTE PORT BAUD RATE CONFIGURATION
RCU20 REMOTE PORT BAUD RATE : 1200
1200 2400 4800 NEXT