Comtech EF Data RCS20 - Manual (Page 167)

RCS20 M:N Redundancy Switch Revision 15
Remote Operations MN-RCS20 and CD-RCS20
A–25
<1> Backup 2 Demod Hot
Standby Channel Channel number (1 to 8) (0 = No hot standby for backup 2 Demod, or
Channel 9 not configured as backup
A.3.3 Opcode <2003h> Query RCS20 Modem Addresses
Query Response Data Field (11 bytes)
<1> Number of Channels 10 for RCS20
<1> Modem Address 0 Modem Remote Address for channel 0 (BU 1)
<1> Modem Address 1 Modem Address 1 (Modem Remote Address for channel 1 (Prime 1)
<1> Modem Address 2 Modem Address 2 (Modem Remote Address for channel 2 (Prime 2)
<1> Modem Address 3 Modem Address 3 (Modem Remote Address for channel 3 (Prime 3)
<1> Modem Address 4 Modem Address 4 (Modem Remote Address for channel 4 (Prime 4)
<1> Modem Address 5 Modem Address 5 (Modem Remote Address for channel 5 (Prime 5)
<1> Modem Address 6 Modem Address 6 (Modem Remote Address for channel 6 (Prime 6)
<1> Modem Address 7 Modem Address 7 (Modem Remote Address for channel 7 (Prime 7)
<1> Modem Address 8 Modem Address 8 (Modem Remote Address for channel 8 (Prime 8)
<1> Modem Address 9 Modem Address 9 (Modem Remote Address for channel 9 (Prime 9 /
BU 2)
A.3.4 Opcode <2004h> Query RCS20 Backup Mode
Query Response Data Field (3 bytes)
<1> Maximum Number of
Backup Channels 2 for RCS20
<1> Backup 1 (Channel 0)
Backup Mode 0 = Manual, 1 = Automatic non-Revertive, 2 = Automatic Revertive
<1> Backup 2 (Channel 9)
Backup Mode 0 = Manual, 1 = Automatic non-Revertive, 2 = Automatic Revertive
(Ignore if Channel 9 is not configured as backup)
A.3.5 Opcode <2005h> Query RCS20 Expansion Module Information
Query Response Data Field (7 bytes)
<1> Number of Expansion
Slots 6 for RCS20