Comtech EF Data RCS20 - Manual (Page 67)

RCS20 M:N Redundancy Switch Revision 15
User Interfaces MN-RCS20 and CD-RCS20
4–33
4.3.2.4 TERMINAL PORT EMULATION
This subscreen allows the user to modify the RCS20 terminal port terminal emulation.
4.3.2.4.1 Programming steps:
1. Press , , or to select the desired terminal port emulation type.
The switch parameter table will be updated immediately.
2. Press or to abort programming (no switch parameters changed).
Key Label Function
S1 ADDS VP Selects ADDS VP as Term Emulation
S2 VT 100 Selects VT100 as Term Emulation.
S3 WYSE 50 Selects WYSESO as Term Emulation.
S4 RETURN Press to cycle back to the TERMINAL PORT CONFIGURATION Screen
Numeric Keypad --- Press to abort programming.
TERMINAL PORT EMULATION
TERMINAL EMULATING:
VT100
ADDS VP VT100 WYSESO RETURN