Comtech EF Data RCS20 - Manual (Page 55)

RCS20 M:N Redundancy Switch Revision 15
User Interfaces MN-RCS20 and CD-RCS20
4–21
Key Label Function
Numeric Keypad --- Used to enter the priority for the selected prime modem.
4.3.1.14 IFS20L DEMOD BKUP ASSIGNMENT SUMMARY
This screen is used to assign the channels. Channel assignments depend on whether the default or
Combined IFL configuration is in use. See Section 4.3.2.9.3 for more information about Combined IFL.
When the default configuration is used, assignments may be made as follows:
• A through D for Backup 1
• E through H for Backup 2
When Combined IFL (see Section 4.3.2.9.3) is used, a 1:9 configuration is the only permitted
configuration, and assignments may be made only as follows:
• A through H for Backup 1
In all cases, multiple demodulator backups may be assigned to any channel.
Key Label Function
S1
SET
BU1 Selects Backup Unit 1 for change and cycles to the IFS20L DEMOD BKUP 1
ASSIGNMENT PROGRAM Subscreen.
S2
SET
BU2 Selects Backup Unit 1 for change and cycles to the IFS20L DEMOD BKUP 2
ASSIGNMENT PROGRAM Subscreen.
S3 --- N/A
S4 NEXT Press to cycle to the next screen.
Numeric Keypad --- N/A
AUTO MODE ASSIGNMENT SUMMARY
MODEM : 1 2 3 4 5 6 7 8
BU1-DEMOD : A A A A B B B B
BU2-DEMOD : E E E E E E E E
SET BU1 SET BU2 NEXT