Comtech EF Data RCS20 - Manual (Page 75)

RCS20 M:N Redundancy Switch Revision 15
User Interfaces MN-RCS20 and CD-RCS20
4–41
2. Press to cycle to the SET TIME Subscreen.
Key Label Function
S1 DATE Press to cycle to the SET DATE Subscreen.
S2 TIME Press to cycle to the SET TIME Subscreen.
S3 --- N/A
S4 NEXT Press to cycle to the next screen.
Numeric Keypad --- N/A
4.3.2.13 SET DATE
This subscreen allows the user to configure the real-time clock date for the RCS20.
4.3.2.13.1 Programming steps:
1. Press  or  to move the blinking cursor to the day, month, or year.
2. Press to increase the value of the day, month or year (at the location of the blinking
cursor), press to decrease the value of the day, month, or year (at the location of the
blinking cursor).
3. Press to abort programming (no switch parameters changed).
4. Press to load the information on the screen into the switch parameter table.
Key Label Function
S1 
Press to move the blinking cursor to the left. Used to select Year, Month, and/or Day to
be changed.
S2 
Press to move the blinking cursor to the right. Used to select Day, Month, and/or Year to
be changed.
S3 UP Press to increment the selected field.
S4 DOWN Press to decrement the selected field.
Numeric Keypad ---
Press to abort changes and cycle back to the TIME / DATE CONFIGURATION
Screen.
Press to accept the selected date.
SET DATE
DATE : 01 JAN 04
<--- ---> UP DOWN