Comtech EF Data RCS20 - Manual (Page 199)

RCS20 M:N Redundancy Switch Revision 15
RCS20 L-Band Setup and Configuration MN-RCS20 and CD-RCS20
C–1
Appendix C. L-Band Demod Switch
Setup and Configuration
The L-Band Demodulator Switch supports various configurations such as multiple antennas and multiple
polarities, 4-input or combined 8-input modes.
Figure C-1 depicts the block diagram for an example switch setup in 4-input mode. Connect the cables
per Figure C-1 for a single antenna with dual-polarity. Additional hardware may be required by the
customer. Combiners and cables are optional.
Figure C-1. RCS20 L-Band Rx 4-Port Switch to Accommodate Polarity