Comtech EF Data RCS20 - Manual (Page 46)

RCS20 M:N Redundancy Switch Revision 15
User Interfaces MN-RCS20 and CD-RCS20
4–12
4.3.1.6 BACKUP MODE CONFIGURATION
This screen displays the mode of backup operation for Backup Channels 1 and 2. If Channel 9 is
configured as a prime channel, the selections for Backup Channel 2 will be unavailable.
4.3.1.6.1 Programming steps:
1. Press to configure the mode of backup operation for Backup Channel 1
(Channel 0).
2. Press to configure the mode of backup operation for Backup Channel 2
(Channel 9). The label for this key is not displayed if Channel 9 is configured as a prime channel.
Key Label Function
S1
BU1
MODE Selects Backup Unit 1 for change and cycles to the BACKUP MODE 1 SELECT
Subscreen.
S2
BU2
MODE
Selects Backup Unit 2 for change and cycles to the BACKUP MODE 2 SELECT
Subscreen. The label for this key will not be displayed if Channel 9 is configured as a
prime channel.
S3 --- N/A
S4 NEXT Press to cycle to the next screen.
Numeric Keypad --- N/A
MODE CONFIGURATION
BACKUP 1 MODE: MANUAL
BACKUP 2 MODE: MANUAL
BU1 MODE BU2 MODE NEXT