Basler Electric BE1-700 - Manual (Page 5)

REVISION HISTORY
The following information provides a historical summary of the changes made to this instruction manual
(9376700990), BESTCOMS software, application firmware, and hardware of the BE1-700.
Manual
Revision and Date Change
M, 08/14
• Added serial number to fault reports and sequence of events in
Section 6 and replaced Figures 6-16, 6-20, and 14-41.
L, 02/14 • Updated contact-sensing inputs specifications in Sections 1, 3, and
12.
• Added Storage statement in Section 13.
• Updated PC software requirements in Section 14.
K, 10/11
• Changed Isolation specs in Section 1 to exclude Ethernet port.
J, 12/10
• Updated 24 Vdc resistance, voltage, and current values in Table 6-9.
• Improved Figure 12-11.
H, 07/10 • Re-organized Operational Specifications and listed functions in
numerical order in Section 1.
• Moved Real-Time Clock from Operational Specifications to General
Specifications in Section 1.
• Corrected terminal numbering in Figure 12-22, RS-485 DB-37 to BE1-
700.
G, 10/09 • Changed all instances of BESTWAVE to BESTWAVEPlus™.
F, 09/09 • Added option “5” power supply type in style chart, power supply and
control inputs specifications in Section 1, General Information.
• Added option “5” power supply type under Contact Sensing Inputs in
Sections 3 and 12.
• Added CE Compliance in Section 1, General Information.
• Updated Figure 4-54, Overall Logic Diagram for Reclosing, to show
PI 0/100 ms and PI Stretched.
• Updated screen shots of BESTCOMS style chart screen.
E, 02/09 • Added Republic of Belarus certification.
• Updated contact sense turn-on voltage range and burden values to
reflect new digital board.
• Added screens 5.1.2.2-5.1.2.4, 5.1.3.2-5.1.3.6, and 5.1.1.4 to Figure
10-8, Protection Menu Branch Structure. Removed screen 5.1.12.8.
• Changed Figure 12-5 to show OUTA as Normally Closed contact.
D, 12/08 • Added 3-Phase VT 4-Wire Connection and 3-Phase VT 3-Wire
Connection to Figure 12-11.
9376700990 Rev M BE1-700 Introduction iii