Basler Electric BE1-700 - Manual (Page 442)

Table B-4. Report Commands
Type ASCII Command Function
HMI
Screen
RA[=0] Report/Reset alarm information. 1.3
RA-LGC[=0] Report/Reset logic alarm information. N/A
RA-MAJ[=0] Report/Reset major alarm information. N/A
RA-MIN[=0] Report/Reset minor alarm information. N/A
RA-REL[=0] Report/Reset relay alarm information. N/A
RB Read breaker status. 1.5.6
C RB-DUTY[[=%duty>] Read/Set breaker contact duty log. 4.3.2
RB-OPCNTR[=<#operations>] Read/Set breaker operation counter. 4.3.1
C RD Report all demand data. N/A
C RD-PI
[=0]
Read/Reset peak demand current.
4.4.3.1 -
4.4.3.5
C RD-TI[
]
Report today’s demand current.
4.4.1.1 -
4.4.1.5
C RD-YI[
]
Report yesterday’s demand current.
4.4.2.1 -
4.4.2.5
RF[-n/NEW][=0/TRIG] Read/Reset fault report data. N/A
RG Report general information. N/A
RG-DATE[={M/D/Y}] or RG-
DATE[={D-M-Y}]
Read/Set date. 4.6
RG-DST
Report Start/Stop Times and Dates for Daylight
Savings Time referenced to local time.
N/A
RG-STAT Report relay status. N/A
RG-TARG[=0] Report/Reset target status. 1.2
RG-TIME[=hr:mn:sc] or RG-
TIME[=hr:mnsc]
Report/Set time. 4.6
RG-VER
Read program version, model number, style
number, and serial number.
4.7
RO-nA/B[#].CFG/DAT Read oscillographic COMTRADE fault report. N/A
RS[-n/Fn/ALM/IO/LGC/NEW][=0] Read/Reset Sequence of Events Record Data. N/A
Table B-5. Setting Command
Type ASCII Command Function HMI Screen
S Read all relay setting parameters. N/A
Table B-6. Alarm Setting Commands
Type ASCII Command Function HMI Screen
SA Read all major and minor alarm setting. N/A
V SA-24[=,time delay>] Read/Set Volts Per Hertz alarm settings. N/A
SA-BKR[=,] Read/Set breaker alarm settings. N/A
SA-DI
[=]
Read/Set demand alarm settings. N/A
SA-LGC[=[/]…
[]]
Read/Set logic alarm setting mask. N/A
SA-MIN[=[/]…
[]]
Read/Set minor alarm setting mask. N/A
SA-MAJ[=[/]…
[]]
Read/Set major alarm setting mask. N/A
SA-RESET[=] Read/Set programmable alarms reset logic. N/A
B-2 BE1-700 Command Cross-Reference 9376700990 Rev M