Basler Electric BE1-700 - Manual (Page 257)

RA-MIN Command
Purpose:
Report/Reset Minor Alarm information
Syntax: RA-MIN[=0]
Example: RA-MIN
Reference: Section 6, Reporting and Alarm Functions, Alarms Function
RA-REL Command
Purpose:
Report/Reset Relay Alarm information
Syntax: RA-REL[=0]
Example: RA-REL
Reference: Section 6, Reporting and Alarm Functions, Alarms Function
RB Command
Purpose:
Read breaker status
Syntax: RB
Example: RB
Reference: Section 6, Reporting and Alarm Functions, Breaker Monitoring
RB-DUTY Command
Purpose:
Read/Set breaker contact Duty Log
Syntax: RB-DUTY[{phase}[={%duty}]] where %duty is % of dmax set with SB-DUTY
Example: RB-DUTYA or RB-DUTYB=50
Reference: Section 6, Reporting and Alarm Functions, Breaker Monitoring
RB-OPCNTR Command
Purpose:
Read/Set Breaker Operation Counter
Syntax: RB-OPCNTR[={#operations}]
Example: RB-OPCNTR=32 or RB-OPCNTR=652
Reference: Section 6, Reporting and Alarm Functions, Breaker Monitoring
RD Command (BE1-700C only)
Purpose:
Report all demand data
Syntax: RD
Example: RD
Reference: Section 6, Reporting and Alarm Functions, Demand Functions
RD-PI Command
Purpose:
Read/Reset peak demand current (I)
Syntax: RD-PI[{p}[=0]] where p=A/B/C/N/Q
Example: RD-PI or RD-PIA or RD-PIN or RD-PI=0
Reference: Section 6, Reporting and Alarm Functions, Demand Functions
RD-TI Command
Purpose:
Report today's demand current (I)
Syntax: RD-TI[{p}] where p=A/B/C/N/Q
Example: RD-TI or RD-TIA or RD-TIN
Reference: Section 6, Reporting and Alarm Functions, Demand Functions
RD-YI Command
Purpose:
Report yesterday's demand current (I)
Syntax: RD-YI[{p}] where p=A/B/C/N/Q
Example: RD-YI or RD-YIA or RD-YIN
Reference: Section 6, Reporting and Alarm Functions, Demand Functions
9376700990 Rev M BE1-700 ASCII Command Interface 11-11