Basler Electric BE1-700 - Manual (Page 359)

General Operation Screen
Pull-down the Screens menu and select General Operation or click on the General Operation
icon, which is shown at the right margin of this paragraph. This screen has seven folder tabs. The
first tab is General Information (Figure 14-4).
General Information
The General Information tab allows you to fill in the style number of the relay, which is available from the
label on the relay front panel. You can also enter the serial number of the relay and software application
version information. Additionally, you may enter the name of the substation and the feeders so that the
relay reports have some form of installation-specific identification.
Figure 14-4. General Operation Screen, General Information Tab
Power System
This tab (Figure 14-5) allows you to enter the frequency, phase rotation, and nominal CT secondary
voltage and current. If the phase rotation entry is not correct, it will cause problems in several areas
including metering values and targets. In other words, you must make entries in these fields in order for
the BE1-700 protection elements to function properly. These symmetrical component sequence quantities
are entered to provide immediate reference information for settings of the protection elements in the BE1-
700 relay.
9376700990 Rev M BE1-700 BESTCOMS Software 14-5