Basler Electric BE1-700 - Manual (Page 444)

Type ASCII Command Function
HMI
Screen
C SL-50T
[=,]
Read/Set logic for 50 function modules. N/A
C SL-51
[=,]
Read/Set logic for 51 function modules. N/A
C SL-59
[=,]
Read/Set logic for 59 function modules. N/A
SL-62[=,,] Read/Set logic for 62 function modules. N/A
O
SL-79[={mode},{RI logic},{STATUS logic},
{WAIT logic},{LOCKOUT logic}]
Read/Set logic for 79 function. N/A
V SL-81[=,] Read/Set logic for 81 function modules. N/A
C SL-BF[=,,]
Read/Set logic for breaker failure
function modules.
N/A
SL-GROUP[=,,logic>,] Read/Set logic for setting group
module.
N/A
SL-N[=]
Read, set, or copy the name of the
custom logic.
N/A
SL-VO[=] Read/Set output logic. N/A
SL-43[=] Read/Set logic for Virtual Switches. N/A
SL-101[=]
Read/Set logic for Virtual Breaker
Control Switch.
N/A
Table B-10. User Programmable Name Setting Command
Type ASCII Command Function
HMI
Screen
SN[-[=,,label>]] Read/Set user programmable
names.
N/A
Table B-11. Protection Setting Commands
Type ASCII Command Function
HMI
Screen
S Read all protection settings. N/A
V
S-24[=,,Time>,] Read/Set 24 pickup level, time
delay, and reset delay.
5.x.1.1
V S-25[=,,,]
Read/Set 25 delta volts, phase
angle, slip frequency, and
mode.
5.x.2.1
V
S-25VM[=,,,condition>] Read/Set 25VM pickups, time
delay, and logic condition. 5.x.2.2 -
5.x.2.4
V S-27
[=,]
Read/Set 27 pickup level, time
delay, and mode. 5.x.3.1 -
5.x.3.3
V S-47[=,]
Read/Set 47 pickup level and
time delay.
5.x.5.1
C S-50T
[=,]
Read/Set 50T pickup level and
time delay. 5.x.6.1 -
5.x.6.6
C S-51
[=,,]
Read/Set 51 pickup level, time
delay, and curve. 5.x.7.1 -
5.x.7.5
V S-59
[=,]
Read/Set 59 pickup level, time
delay, and mode. 5.x.8.1 -
5.x.8.4
S-62[=,] Read/Set 62 time delay.
5.x.9.1 -
5.x.9.2
S-67N[=,]
Read/Set 67 Neutral Polarizing
Mode and Quantities. 5.x.10.1 -
5.x.10.2
B-4 BE1-700 Command Cross-Reference 9376700990 Rev M