E-mail alerts, Configuring the e-mail alerts function, E-mail alerts -17 – Basler Electric BE1-700 User Manual
Page 409: Configuring the e-mail alerts function -17
Figure 15-16. BE1-700 SER Reports Web Page
E-MAIL ALERTS
The BE1-700 relay with the BESTnet option can provide status alerts via e-mail. Any system or device
capable of receiving electronic-mail (e-mail) can be the recipient of these alerts.
Configuring the E-mail Alerts Function
In order to use e-mail alerts, the BE1-700 must be purchased with Communications Protocol option 4 or
5. Refer to Section 1 for the BE1-700 style chart, Figure 1-1. Likewise, option 4 or 5 must be entered as
part of the style number in BESTCOMS. (See Section 14, BESTCOMS Software.)
Configuring BE1-700 e-mail alerts involves two steps. Both steps must be executed in order for e-mail
alerts to function properly.
Step 1.
The BESTlogic equations must be set using the BESTnet tab in BESTCOMS.
First, go to the BESTnet Settings Screen in BESTCOMS (Figure 15-17). This screen is used for
setting e-mail triggers. A maximum of seven alerts can be set.
9376700990 Rev M
BE1-700 BESTnet Communication
15-17