Artesyn CPCI-6200 Installation and Use (May 2015) - Manual (Page 63)

Controls, LEDs, and Connectors
CPCI-6200 Installation and Use (6806800J66E) 63
10/100/1000Base-T Ethernet signals:
 G0_Dx–CH1 10/100/1000Base-T Ethernet
 G1_Dx–CH2 10/100/1000Base-T Ethernet
PMC User I/O signals:
 PMCIO(64:1)–PMC I/O
 IPMI_PWR–+3.3 V derived from IPMB input power
3.3.4 CPCI Connector, J4
J4 is a five-row CPCI connector that is not used on the CPCI-6200. It is not populated.
3.3.5 CPCI User I/O Connector, J5
J5 is a five-row user I/O CPCI connector.
9 PMCIO25 PMCIO24 PMCIO23 PMCIO22 PMCIO21
10 PMCIO20 PMCIO19 PMCIO18 PMCIO17 PMCIO16
11 PMCIO15 PMCIO14 PMCIO13 PMCIO12 PMCIO11
12 PMCIO10 PMCIO9 PMCIO8 PMCIO7 PMCIO6
13 PMCIO5 PMCIO4 PMCIO3 PMCIO2 PMCIO1
14 +3.3V +3.3V +3.3V +5V +5V
15 G1_DB+ (RX2+) G1_DB- (RX2-) GND G1_DD+ G1_DD-
16 G1_DA+ (TX2+) G1_DA- (TX2-) GND G1_DC+ G1_DC-
17 G0_DB+ (RX1+) G0_DB- (RX1-) GND G0_DD+ G0_DD-
18 G0_DA+ (TX1+) G0_DA- (TX1-) GND G0_DC+ G0_DC-
19 GND +12V -12V GND GND
Table 3-4 CPCI User I/O Connector Pinout, J3 (continued)
Pin Row A Row B Row C Row D Row E