Artesyn CPCI-6200 Installation and Use (May 2015) - Manual (Page 43)

Hardware Preparation and Installation
CPCI-6200 Installation and Use (6806800J66E) 43
2.4 Power Requirements
The board's power requirements depend on the installed hardware accessories. The following
table gives examples of typical power requirements for a processor running without any
accessories.
If you want to install any accessories, the load of the respective accessory has to be added to
the load of the board variant you are using. For information on the accessories' power
requirements, refer to the documentation delivered with the respective accessory or ask your
local representative.
Shock Half-sine, 11 ms, 30 ms Blade-level packaging
Half-sine, 6 ms at 180 ms
Free Fall Blade-level packaging
100 mm (unpackaged) per GR-63-
CORE
Table 2-1 CPCI-6200 Environmental Requirements (continued)
Characteristics Operating Non-Operating
Table 2-2 Baseboard Power Requirements
Configuration Maximum Power Requirement
CPCI6200-13-2G (1.3 GHz, 2 GB memory) 3.3 V, 4.1 A, 13.5 W
5.0 V, 4.6 A, 23 W
CPCI6200-15-4G (1.5 GHz, 4 GB memory) 3.3 V, 4.2 A, 13.8 W
5.0 V, 5.7 A, 28.5 W (Estimated)