Artesyn CPCI-6200 Installation and Use (May 2015) - Manual (Page 148)

MOTLoad Firmware
CPCI-6200 Installation and Use (6806800J66E) 148
 The argument/option identifier character is always preceded by a hyphen (“-”) character.
 Options are identified by a single character.
 Option arguments immediately follow (no spaces) the option.
 All commands, command options, device tree strings, etc., are case sensitive.
Example:
CPCI6200> flashProgram -d/dev/flash0 -n00100000
For more information on MOTLoad operation and function, refer to the MOTLoad Firmware
Package User’s Manual.
6.8 MOTLoad Command List
The following table provides a list of all current MOTLoad commands. Products supported by
MOTLoad may or may not employ the full command set. Typing help at the MOTLoad
command prompt displays all commands supported by MOTLoad for a given product.
Table 6-1 MOTLoad Commands
Command Description
as One-Line Instruction Assembler
bcb bch bcw Block Compare Byte/Halfword/Word
bdTempShow Display Current Board Temperature
bfb bfh bfw Block Fill Byte/Halfword/Word
blkCp Block Copy
blkFmt Block Format
blkRd Block Read
blkShow Block Show Device Configuration Data
blkVe Block Verify
blkWr Block Write
bmb bmh bmw Block Move Byte/Halfword/Word
br Assign/Delete/Display User-Program Break-Points