Artesyn CPCI-6200 Installation and Use (May 2015) - Manual (Page 147)

MOTLoad Firmware
CPCI-6200 Installation and Use (6806800J66E) 147
CPCI6200> te
"te" ambiguous
CPCI6200>
6.7.2 Command Line Help
Each MOTLoad firmware package has an extensive, product-specific help facility that can be
accessed through the help command. The user can enter help at the MOTLoad command
line to display a complete listing of all available tests and utilities.
Example
CPCI6200>help
For help with a specific test or utility the user can enter the following at the MOTLoad prompt:
help
The help command also supports a limited form of pattern matching. Refer to the help
command page.
Example
CPCI6200>help testRam
Usage: testRam [-aPh] [-bPh] [-iPd] [-nPh] [-tPd] [-v]
Description: RAM Test [Directory]
Argument/Option Description
-a Ph: Address to Start (Default = Dynamic Allocation)
-b Ph: Block Size (Default = 16KB)
-i Pd: Iterations (Default = 1)
-n Ph: Number of Bytes (Default = 1MB)
-t Ph: Time Delay Between Blocks in OS Ticks (Default = 1)
-v O: Verbose Output
CPCI6200>
6.7.3 Command Line Rules
There are a few things to remember when entering a MOTLoad command:
 Multiple commands are permitted on a single command line, provided they are separated
by a single semicolon(";").
 Spaces separate the various fields on the command line (command/arguments/options).