Artesyn CPCI-6200 Installation and Use (May 2015) - Manual (Page 19)

CPCI-6200 Installation and Use (6806800J66E) 19
About this Manual
Overview of Contents
This manual is divided into the following chapters and appendices.
 Introduction provides an overview of the features of the product, including ordering and
other product information like the location of labels.
 Hardware Preparation and Installation discusses procedures on installing the CPCI
baseboard, PMC modules, and other accessories.
 Controls, LEDs, and Connectors provides information on connector pinouts and board and
front panel layouts.
 Functional Description discusses the main functional blocks on the product.
 MOTLoad Firmware provides an overview and description of basic MOTLoad use including
implementation issues, a list of the initialization sequence, and a description of basic
commands.
 Control via IPMI discusses the IPMI commands that the product supports.
 Memory Maps and Addresses provides details on the various registers and addresses used in
the product.
 Replacing the Battery provides instructions on how to replace the onboard battery.
 Related Documentation provides a list of documentation relevant to the product.
 Safety Notes lists the safety notes applicable to the product.
 Sicherheitshinweise lists the German version of the safety notes.
Abbreviations
This document uses the following abbreviations:
Abbreviation Definition
ANSI American National Standard Institute
BMC Base Board Management Controller
CE Chip Enable
COM Communications