Artesyn CPCI-6200 Installation and Use (May 2015) - Manual (Page 140)

Transition Module Preparation and Installation
CPCI-6200 Installation and Use (6806800J66E) 140
5.10 Removing the Transition Module in a Hot-Swap
Chassis
Although the CPCI-6200 SBC can be removed and inserted while power is applied in a hot-swap
capable backplane, the CPCI-6115-MCPTMs are not hot-swap capable. Inserting or removing
the transition module while the CPU board is active may affect the normal operation of the
CPU board. Even in a hot-swap capable chassis, the CPU back end power should be switched off
(or the chassis power shut down) prior to inserting or removing its corresponding transition
module.