Artesyn CPCI-6200 Installation and Use (May 2015) - Manual (Page 169)

Control via IPMI
CPCI-6200 Installation and Use (6806800J66E) 169
The AggregateV sensor reads all on-board voltage sensors and indicates whether a threshold
of any evaluated sensor is asserted or not. The following table shows the main sensor data
record field values of the AggregateV sensor.
Table 7-24 Aggregate V Sensor
Feature Raw Value Description
Sensor Name Aggregate V -
Sensor LUN 0x00 -
Sensor Number 0x98 -
Entity ID 0x06 -
Sensor Type 0xD2 Artesyn-specific Discrete Digital
Event/Reading Type 0x6F Discrete (sensor-specific)
Assertion Event Mask(Byte 15) 0x3F -
Assertion Event Mask(Byte 16) 0x00 -
Deassertion Event Mask(Byte 17) 0x3F -
Deassertion Event Mask(Byte 18) 0x00 -
Threshold Mask(Byte 19) 0x3F -
Threshold Mask(Byte 20) 0x00 -
Base Unit 0x00 (unspecified)
Rearm mode 0x01 Auto
Hysteresis Support 0x00 No Hysteresis or unspecified
Threshold Access Support 0x00 No Tresholds
Event Message Control 0x00 Per Threshold / Discrete State
Reading Definition - -
Table 7-25 CPCI Signal Sensor
Feature Raw Value Description
Sensor Name CPCI Signal -
Sensor LUN 0x00 -
Sensor Number 0x83 -