Artesyn CPCI-6200 Installation and Use (May 2015) - Manual (Page 34)

Introduction
CPCI-6200 Installation and Use (6806800J66E) 34
NVRAM  One 512 KB MRAM
PCI Express  4x port to PCI Express expansion
 4x port to 6-port PCI Express switch for PCI Express
interface
I/O  One mini DB9 connector on the face plate (one serial
channel)
 Two RJ-45 connectors on the face plate with integrated
LEDs for two 10/100/1000 Ethernet channels
 Two 10/100/1000 Ethernet channels for rear J3 I/O
 One USB 2.0 channel on the face plate
 PMC site 1 front I/O and rear J3 I/O
 PMC site 2 front I/O and rear J5 I/O
Timers  Eight 32-bit MCP8572 timers
 Four 32-bit timers in a PLD
 One watchdog timer in PLD
CPCI Interface Complies with the following:

PCI Specification Revision 2.2
 PICMG 2.1 R2.0 CompactPCI Hot Swap Specification,
January 17, 2001
 PICMG 2.0 R3.0 CompactPCI Core Specification, October
1, 1999
 PICMG 2.16 R1.0 CompactPCI Packet Switching
Backplane Specification, September 5, 2001
 PICMG 2.9 R1.0 CompactPCI System Management
Specification
IPMI Controller  Renesas HD65F2166 processor
 Six I 2 C bus
 8-channel analog/digital converter
 Three serial ports
 512 KB flash
 40 KB SRAM
 1 MB (64K x 16 bit) external SRAM
 External user EEPROM, SDR/FRU, SEL flash of 512 KB each
Table 1-1 Summary of Features (continued)
Function Features