Artesyn CPCI-6200 Installation and Use (May 2015) - Manual (Page 224)

Memory Maps and Addresses
CPCI-6200 Installation and Use (6806800J66E) 224
8.7.1 PCI IDSEL and Interrupt Assignment
Each PCI device has an associated address line connected via a resistor to its IDSEL pin for
Configuration Space accesses. Refer to the MPC8572, Tsi384, Tsi381 and PEX8624 datasheets
for details on generating configuration cycles on each of the PCI buses.
8.7.2 PCI Vendor and Device IDs
The following table shows the Vendor ID and the Device ID for each of the planar PCI devices
on the CPCI-6200.
Table 8-60 IDSEL and Interrupt Mapping for PCI Devices
PCI Bus
Device
Number Field AD Line
for IDSEL PCI Device or Slot
Device/Slot INT to MPC8572 IRQ
INTA# INTB# INTC# INTD#
PCI1 (Tsi384) 0b0_0000 20 PMC1 Primary IRQ1 IRQ2 IRQ3 IRQ0
0b0_0001 21 PMC1 Secondary IRQ2 IRQ3 IRQ0 IRQ1
PCI2 (Tsi384) 0b0_0000 22 PMC2 Primary IRQ0 IRQ1 IRQ2 IRQ3
0b0_0001 23 PMC2 Secondary IRQ1 IRQ2 IRQ3 IRQ0
PCI3 (Tsi384) 0b0_0010 18 CPCI CPLD IRQ2 IRQ3 IRQ0 IRQ1
PCI4 (Tsi381) 0b0_0010 18 uPD720101 USB IRQ3 IRQ0 IRQ1 NC
Table 8-61 Planar PCI Device Identification
Function Device Vendor ID Device ID
System Controller MPC8572 0x1957 0x0041
PCI-E Switch PEX8624 0x10B5 0x8624
PCI-E-to-PCI Bridge Tsi381 0x10E3 0x8111
PCI-E-to-PCI-X Bridge Tsi384 0x10E3 0x8114
PCI - PCI Bridge PCI6466 0x10B5 0x6540
USB Controller μPD720101 0x1033 0x0035