Artesyn CPCI-6200 Installation and Use (May 2015) - Manual (Page 191)

Memory Maps and Addresses
CPCI-6200 Installation and Use (6806800J66E) 191
8.4.1 System Status Register
This is a read-only register that provides general board status information.
Table 8-5 System Status Register, 0xF200_0000
Bit Field Operation Reset
7 PWR12V_EN_STS R X
6 PWR_12P_STS R X
5 PWR_12N_STS R X
4 SW5 R X
3 SAFE_START R X
2 PEX_8624_ERROR R X
1 BD_TYPE R 10
0
Table 8-6 System Status Register Field Definition
PWR12V_EN_STS 12V Power Enable Status from Switch
1 12 V is enabled.
0 12 V is disabled.
PWR_12P_STS +12V Power Status
1 +12 V is good.
0 +12 V is not good.
PWR_12N_STS -12V Power Status
1 -12 V is good.
0 -12 V is not good.
SW5 Switch 5 Status
1 Switch 5 is in OFF position (reserved).
0 Switch 5 is in ON position (reserved).