Artesyn CPCI-6200 Installation and Use (May 2015) - Manual (Page 103)

Functional Description
CPCI-6200 Installation and Use (6806800J66E) 103
4.17 RTC Battery
The CPCI-6200 provides onboard battery clips for holding a coin cell type battery. The clips
allow for the quick and easy replacement of a 3 V button cell lithium battery (CR2430), which
provides back-up power to the onboard M41T83 real-time clock (RTC). A battery switching
circuit that is built into the RTC provides automatic switching between the 3.3 V and battery
voltages. The battery is capable of providing backup power to the RTC for up to 12 years at
nominal temperature.
For information on replacing the battery, see Replacing the Battery on page 227 .
4.18 IPMI Controller
The CPCI-6200 uses the Renesas 16-bit microcontroller H8S/2166 as IPMI controller. The
controller has the following features:
 115 I/O ports
 Eight-channel analog-to-digital converter
 Six I
2
C bus
 Three serial ports
 512 KB flash memory
 40 KB SRAM
USB 3 PCI4_RST_N Tsi381 1 ms 1.35 ms
CPCI
Backplane
Reset
3
PCI_BP_RST_N CPCI CPLD 1 ms 1.35 ms
Flash A 1 FRESET_N Reset CPLD 500 ns 125 μs
1. With MotLoad reset command
2. PCI Specification
Table 4-5 Reset Timing Requirements (continued)
Device Reset Signal Source of Reset
Minimum Reset
Time Actual Reset
Time