Artesyn CPCI-6200 Installation and Use (May 2015) - Manual (Page 33)

Chapter 1
CPCI-6200 Installation and Use (6806800J66E) 33
Introduction
1.1 Features
The CPCI-6200 is a high performance, hot swappable universal Compact PCI board based on
the MPC8572 integrated processor.
Table 1-1 Summary of Features
Function Features
Processor
Host Controller
Memory Controller  One 8572 integrated processor
 Two e500 cores with integrated 1 MB L2 cache
 32 KB data and instruction cache on each core
 Core frequency from 1.3 to 1.5 GHz
 Two integrated DDR3 SDRAM controllers
 Two integrated four-channel DMA controller
 Two integrated PCI Express interfaces (8 lanes of 2.5 Gb/s
each)
 Four integrated 10/100/1000 Ethernet controllers
 One integrated DUART
 Two integrated I 2 C controllers
 One integrated programmable interrupt controller
 One integrated local bus controller
System Memory  Two banks of DDR3 SDRAM with error-correcting code
(ECC)
 Supports 2 or 4 GB
 Provides up to 800 MHz DDR3 data rate
I 2 C  One 8 KB VPD serial EEPROM
 Two 64 KB user configuration serial EEPROMs
 One real time clock (RTC) with battery back-up
 Dual temperature sensors
 Two SPDs for memory
 Connection to the PCIE expander and RTM
Flash  128 MB soldered flash with two alternate 1 MB boot
sectors that can be selected via a hardware switch
 HW switch or SW bit write protection for the entire
logical bank
 Minimum of 4 GB user flash