Artesyn CPCI-6200 Installation and Use (May 2015) - Manual (Page 62)

Controls, LEDs, and Connectors
CPCI-6200 Installation and Use (6806800J66E) 62
3.3.3 CPCI User I/O Connector, J3
J3 is a five-row user I/O CPCI connector.
Note: Row F is ground and is not shown in the table.
10 AD[49] AD[48] AD[47] GND AD[46]
9 AD[52] GND V(IO) AD[51] AD[50]
8 AD[56] AD[55] AD[54] GND AD[53]
7 AD[59] GND V(IO) AD[58] AD[57]
6 AD[63] AD[62] AD[61] GND AD[60]
5 C/BE[5]# 64EN# V(IO) C/BE[4]# PAR64
4 V(IO) BRSVP2B4 C/BE[7]# GND C/BE[6]#
3 RSV GND RSV RSV RSV
2 RSV RSV SYSEN# 1 RSV RSV
1 RSV GND RSV RSV RSV
1. Defined as SYSEN#. This OV allows the CPCI-6200 to ensure that it is installed into a peripheral slot.
Table 3-3 CPCI Bus Connector Pinout, J2 (continued)
Pin Row A Row B Row C Row D Row E
Table 3-4 CPCI User I/O Connector Pinout, J3
Pin Row A Row B Row C Row D Row E
1 IPMI_PWR PMCIO64 PMCIO63 PMCIO62 PMCIO61
2 PMCIO60 PMCIO59 PMCIO58 PMCIO57 PMCIO56
3 PMCIO55 PMCIO54 PMCIO53 PMCIO52 PMCIO51
4 PMCIO50 PMCIO49 PMCIO48 PMCIO47 PMCIO46
5 PMCIO45 PMCIO44 PMCIO43 PMCIO42 PMCIO41
6 PMCIO40 PMCIO39 PMCIO38 PMCIO37 PMCIO36
7 PMCIO35 PMCIO34 PMCIO33 PMCIO32 PMCIO31
8 PMCIO30 PMCIO29 PMCIO28 PMCIO27 PMCIO26